Shell Diving Inflation Valves with Int'l Nipples for diving dry suits
SI Tech, of Sweden
Product Images
Location of the recalled Shell Diving Inflation Valve on the Dry Diving Suit
Close-up of the recalled Shell Diving Inflation Valve (Logos on the valve can vary)
Location of the Batch Code inside of the recalled Shell Diving Inflation Valve
Close-up of the batch code stamped on the inside of the recalled Shell Diving Inflation Valve
Why is it being recalled? (Hazard)
The internal part in the valve can malfunction while in use, causing loss of inflation and thermal protection, posing a risk of hypothermia to the consumer.
What should I do? (Remedy)
Consumers should immediately stop using the dry suits with the recalled inflation valve and contact Ocean Equipment to receive a notification form and shipping information to return the recalled valve free of charge. The valve part will be replaced by trained technicians who are exclusively authorized to update the valve with a free replacement valve part.
Consumer Contact
Ocean Equipment at 800-657-7736 from 9 a.m. to 4 p.m. PT Monday through Friday, by email at [email protected] or online at https://oceanequipment.ca/ and click on "Recall Notice" located at the top of the page; or go to https://www.sitech.se/articles/recall.aspx.
Product Description
This recall involves the Shell Inflation Valves with Int'l Nipples that come with diving dry suits and are also sold separately. The Shell Inflation Valve is used in recreational and technical diving. The recalled valve inflates the diving dry suit to allow the diver to equalize air pressure while descending in the water by pressing on the valve and it provides thermal protection to the diver. The model number and batch code are stamped on the inside of the recalled valve. Instructions on how to find and identify the batch code can be found at www.sitech.se. Model Number 25210 JD1, JE2, JE5, JE6, JF6, JG2, JK6, JK9, JKA, JL1, JL3, KA7, KB8, KG2, KH3, KH4, KK7, KL3, LC1, LC2, LC4, LC7, LC9, LD2, LD6, LD7, LD8 25215 JG1, KA9, LC5
Where was it sold?
Underwater Development, Tulalip, Washington; Aquala Diving, Shreveport, Louisiana; Underwater Sports, Seattle, Washington and other dealers/dive centers and other dive suit manufacturers and distributors nationwide from April 2019 through May 2021 for about $100 per inflation valve when sold separately.
Latest Recall Updates
Unknown Brand
Huaker Magnetic Balls and Rods Sets
February 19, 2026
Unknown Brand
JJGoo LED Balloon Lights
February 19, 2026
Joly's LLC, of Orlando, Florida
Joly's 80% Vinegar (32 oz, pack of two)
February 19, 2026
Meijer Distribution, Inc., of Grand Rapids, Michigan
Meijer one-piece footed 12-, 18-and 24-month children's sleepwear
February 19, 2026
Unknown Brand
Prismatic 3D Prints Book Nooks with Lights
February 19, 2026
Unknown Brand
SAMIT Youth Multi-Purpose Helmets
February 19, 2026
Quick Facts
Recall Number
22115
Impacted Units
About 1,670 (In addition, about 28 were sold in Canada)
Incidents/Injuries
SI Tech has received three reports of the valve part malfunctioning, resulting in loss of inflation in the dry suit. No injuries have been reported.
Did you buy this?
Stop using the product immediately. Check the "Remedy" section for refund or repair instructions.